在葡萄酒瓶上绘制您自己的个性化标签——这是纪念婚礼、周年纪念日、生日或任何特殊场合的绝佳礼物创意！
你需要：
- 一瓶你最喜欢的葡萄酒
- 丹尼尔·史密斯水彩底料
- 丹尼尔·史密斯遮蔽液
- 橡胶水泥拾取
- 画笔
- 用来在绘画时托住酒瓶的毛巾
- 美纹纸胶带
- 砂纸
- 丹尼尔·史密斯水彩画：
用水彩颜料涂抹瓶子
- You can cover one of the existing labels with the ground, or remove a label and paint a square of ground directly on the glass, marking the area with masking tape. Consider customizing the back of the bottle, leaving the branding and wine name visible on the front.
- If applying the ground directly to the glass, rough up the glass inside of the masking tape with sandpaper first.
- Lay wine bottle on its side, cradled by a towel with edges pushed up on two sides to keep the bottle from rolling while you apply the ground with smooth brush strokes. If painting directly on to the glass, allow to dry then apply a 2nd coat. 5. Remove the masking tape when completely dry.
- Allow the ground to cure for 24 hours before painting your design with your watercolors.
绘制你的标签设计
- Lightly sketch in your design on top of the ground area.
- Apply masking fluid in any areas you want blocked off from the background wash. In this design shown, the grapes, leaf and stem had the masking fluid applied. Allow to dry thoroughly.
- Paint in your background wash color – Quinacridone Gold was used for this in the video.
- With the same color, paint a bold label outline.
- When the background wash color has dried thoroughly, remove the masking fluid with a rubber cement pick up.
- Mix the Indanthrone Blue & Quin Violet and paint in the grapes first with a light wash and allow to dry. Paint in the grapes with a darker mix, then pull out some of the color to give roundness to the grapes. Paint in the leaf and stem with Sap Green, mixed with a little Quinacridone Gold.
- Paint a name or date on the edge of your outline.
- Protect your creation with a spray varnish.
